40 Foot Gooseneck Tri-Axle 12 Pin Chassis

This fixed length heavy-duty 40 foot 12-pin chassis handles (1) 40ft container, (2) light loaded 20ft containers or (1) heavy 20ft container in the center of the chassis.

40ft gooseneck tri-axle chassis capable of carrying (1) 40ft high cube container, two empty 20ft containers or (1) loaded 20ft container in the center position.

Chassis is designed and built according to Association of American Railroads (AAR), Federal Motor Vehicle Safety Standards (FMVSS), International Standards Organization (ISO), American National Standards Institute (ANSI), Department of Transportation (DOT), American Bureau of Shipping (ABS), Society of Automotive Engineers (SAE), and Truck Trailer Manufacturers Association (TTMA) standards.

Spring suspension, 11R22.5 tires on 10-hole hub piloted disc wheels, and ABS are standard. Options include air ride.  

Chassis can be stacked up to 4 high for power only transport.

 

     
 
40 Foot GN 12-Pin Tri-Axle Specifications:
Overall Length:  40’-8”
Overall Width: 96”
King Pin Location: 36"
Coupler Height:  48” 
Tare Weight: 10,800 lbs
Main Rails: Fabricated high strength steel main beams
Landing Gear: Two-speed mechanism and square leg tubing with 10” x 10” low profile sand shoes
Suspension: Hutch with Three Leaf Springs (11,000 lb capacity each) 
Axles: Three axles of 5” round and 22,500 lb beam capacity each; 16.5 x 7-inch Q brakes; automatic type slack adjusters   
Brake System: Meritor Wabco 2S/1M Anti-lock Braking System; 30/30 Spring brake chambers
Tires / Wheels  11R22.5 tires on 10-hole disc wheels
Electrical: 12 Volt with plug type connectors, 7-way plug, sealed wire harnesses and lights
Twist Locks: Cast steel to engage ISO corner castings
Paint:    Commercial sandblast, primer, and high quality paint system
Other: Conspicuity Tape, Bumper, 24 x 30 Mud Flaps