Tandem Axle Drop Frame ISO Tank Chassis

Drop frame tank chassis with tandem axle centers of 49in set up to carry one 20ft ISO tank rear of drop.  Low rear deck height for stability and safety.

Tank chassis is designed and built according to Association of American Railroads (AAR), Federal Motor Vehicle Safety Standards (FMVSS), International Standards Organization (ISO), American National Standards Institute (ANSI), Department of Transportation (DOT), American Bureau of Shipping (ABS), Society of Automotive Engineers (SAE), and Truck Trailer Manufacturers Association (TTMA) standards. 

Standard components include spring suspension, 255/70R22.5 radial tires on 10-hole disc wheels, 2 speed landing legs, and ABS. Fenders, aluminum wheels and hubs, and air ride are some of the options
 
Stacked 3 high for power only transport.
          
 
43 Foot Tandem Axle Tank Chassis Specifications:
Overall Length:  43’-3”
Overall Width: 96”
King Pin Location: 15"
Coupler Height: 48"
Frame Height:  41.5” at container
Tare Weight: 7,800 lbs
Main Rails: Fabricated high strength steel main beams
Landing Gear: Two-speed mechanism and square leg tubing with 10” x 10” low profile sand shoes
Suspension: Hutch with Two Leaf Springs 
Axles: Two axles of 5” round and 22,500 lb beam capacity each; 16.5 x 7-inch Q brakes; automatic type slack adjusters   
Axle Centers: 49"
Brake System: Meritor Wabco 2S/1M Anti-lock Braking System; 30/30 Spring brake chambers
Tires / Wheels  255/70R22.5 on 10-hole disc wheels
Lift Kit: Lift ready but kit is optional
Electrical: 12 Volt with plug type connectors, 7-way plug, sealed wire harnesses and lights
Twist Locks: Cast steel to engage ISO corner castings
Paint:    Commercial sandblast, primer, and high quality paint system
Other: Conspicuity Tape, Bumper, 24 x 30 Mud Flaps, Fenders